Control of Fugitive and Hazardous Dusts

Control of Fugitive and Hazardous Dusts, 1st Edition

Control of Fugitive and Hazardous Dusts, 1st Edition,C. Cowherd,ISBN9780815512530


William Andrew



229 X 152

Describes methods of controlling contaminated fugitive dust originating from contaminated land surfaces.

Print Book


In Stock

Estimated Delivery Time
USD 72.95


Describes methods of controlling contaminated fugitive dust originating from contaminated land surfaces. The contaminated dust may be released by three basic mechanisms: vehicle reentrainment, cleanup activities, and wind erosion. Different dust suppressant techniques are used to treat each mechanism.


Environmental engineers, land reclamation specialists.

Information about this author is currently not available.

Control of Fugitive and Hazardous Dusts, 1st Edition

1. Introduction
1.1 Regulatory Requirements for Fugitive Dust Control Under RCRA
1.2 Particulate Emission Factor Models
1.3 Preventive and Mitigate Control Options
1.4 On-Site Versus Off-Site Facilities
1.5 Organization of This Document
1.6 References for Section 1
2. Paved and Unpaved Roads
2.1 Paved Roads
2.2 Unpaved Roads
2.3 Example Calculation
2.4 References for Section 2
3. Open Waste Piles and Staging Areas
3.1 Source Description
3.2 Estimation of Uncontrolled Emissions
3.3 Demonstrated Control Techniques
3.4 Control Performance Estimation
3.5 Procedures for Compliance Determination
3.6 Example Calculation
3.7 References for Section 3
4. Dry Surface Impoundments
4.1 Source Description
4.2 Estimation of Uncontrolled Emissions
4.3 Demonstrated Control Techniques
4.4 Control Performance Estimation
4.5 Procedures for Compliance Determination
4.6 Example Calculation
4.7 References for Section 4
5. Landfills
5.1 Source Description
5.2 Estimation of Uncontrolled Emissions
5.3 Control Techniques
5.4 Control Performance Estimation
5.5 Procedures for Compliance Determination
5.6 Example Calculation
5.7 References for Section 5
6. Land Treatment
6.1 Source Description
6.2 Estimation of Uncontrolled Emissions
6.3 Control Techniques
6.4 Control Performance Estimation
6.5 Procedures for Compliance Determination
6.6 Example Calculation
6.7 References for Section 6
7. Waste Stabilization
7.1 Source Description
7.2 Estimation of Uncontrolled Emissions
7.3 Control Techniques
7.4 Control Performance Estimation
7.5 Procedures for Compliance Determination
7.6 Example Calculation
7.7 References for Section 7
Appendix A: Open Dust Source Emission Factor Rating and Control Efficiency Terminology
Appendix B: Estimation of Control Costs and Cost Effectiveness
Appendix C: Screening Techniques, Modeling Information and Health Risks Information
Appendix D: Sampling and Analysis Procedures

Part II
1. Introduction
2. Control of Emissions From Vehicle Reentrainment
2.1 Dust Producing Mechanisms
2.2 Quantification of Emissions
2.3 Principles of Control
2.4 Fugitive Dust Control Methods and Costs
2.5 Control Effectiveness
3. Control of Emissions from Soil Movement
3.1 Dust Producing Mechanisms and Principles of Control
3.2 Quantification of Emissions
3.3 Principles of Emission Control
3.4 Available Control Products
4. Control of Emissions from Wind Erosion
4.1 Dust Producing Mechanisms
4.2 Quantification of Emissions
4.3 Principles of Emission Control
4.4 Available Control Products and Their Application
4.5 Control Effectiveness
5. Formulation of a Dust Control Plan
5.1 Identification of Dust Sources
5.2 Identification of Dust Control Methods to Be Used
5.3 Development of the Implentation Plan
5.4 Development of Inspection, Recordkeeping, and Monitoring Program
5.5 Allocation of Sufficient Resources
Appendix A: Equipment Decontamination and Worker Protection
Appendix B: Non-Air Impacts From the Use of Dust Suppressant Measures

Cyber Week Pre-Sale | Use Code CYBOOK15

Shop with Confidence

Free Shipping around the world
▪ Broad range of products
▪ 30 days return policy

Contact Us